Changing Static ip Address on Microsoft Operating System Computers Is Easy

Changing static ip address is possible easily and you will have no need to learn about any computer configurations. Just reboot your computer and find a change in your static address with no difficulty. In addition to this, if your computer is attached to a router, then switch-off the power supply that is connected to it as well to get a change in ip address. When your computer is connected with Ethernet or hubs or switches then you will have to enter into the router administrative console and then release the IP address. You may not be able to release it, but it may change from manufacturer to manufacturer. You will also have to turn off router, Ethernet hubs, switches and cable or DSL modem. Give rest to your computer for a night and turn on your computer following day.

MAC address is a hardware, which can be your Ethernet card address plays a major part in getting ip address assigned by ISP. In order to tighten your security system on computer, you are always advised to make use of cable or DSL modem and a router instead of connecting Cable or DSL modem directly. MAC address protects your computer from invading proxies but advanced proxies can break the MAC address code and enter in your computer network. Hence, you should not be totally dependent on MAC address alone for protecting your computer network from intruders.

In case when you are not successful in Changing Static IP address, then open up your router and check for clone MAC address option, By enabling that option you will be successful in changing static ip address. In most of the cases, you will able to change your ip address only once. If you are unsuccessful in changing static ip address then contact your ISP and ask for suggestions and also confirm for the amount of time you will need a connection to be kept in in-active state for ip to change.

When you have employed windows operating system on your computer, changing static ip address is possible. You will have to purchase static IP address if you are an individual user or a website owner. For business purpose, static ip address is more suitable for usage. Maintaining a block of static ip address is always preferred otherwise follow the stated steps below.

Open up the computer panel and go to network and Internet settings. Keep the cursor on the “Manage Network settings' and right click the icon and get into the TCP or IP and click it and later click for “Properties”. Go to the option which refers to “Use of the following IP address” if this option is not available then select an option so as to activate it. Enter in the static ip address and when you are employing a change on the static ip address you must change subnet mask and Gateway address as well. Hence, Changing Static IP address is not difficult and you can prevent intruders entering into the computer network domain.